Brixwell 99126-CCP48-XCP40 Clear Anodized Low-Profile 5/16″ Wide Dual Seal Aluminum Spacer 48″ Stock Length – pack of 40
$3.99 – $928.16
This Low Profile Dual Seal Spacer was designed for fabricators of Insulating Glass who prefer a dual seal system. The groove on the shoulder…
Brixwell FS77A-CCP4 Satin Anodized Finned Door Sweep – 4 inch Sample
$3.99 – $2,390.23
Finned Door Sweep and Weatherstrip stops air, water, dust, and insects from entering. It combines advanced energy saving finned technology with a strip of…
CRL 99127 Clear Anodized Low-Profile 3/8″ Wide Dual Seal Aluminum Spacer 152″ Stock Length
$3.99 – $993.33
This CRL Low Profile Dual Seal Spacer was designed for fabricators of Insulating Glass who prefer a dual seal system. The groove on the…
CRL CAP34BS 316 Brushed Stainless 3/4″ Diameter Standoff Cap Assembly
$6.06 – $7.25
This CRL Standoff Cap Assembly is used in conjunction with the CRL 3/4" (19 mm) Standoff Base to create displays, furniture or signage. Standard Cap…
CRL NLN1420S Stainless 1/4″-20 Thread Nylock Hex Nut
$0.72 – $7.22
These CRL Stainless Nylock Hex Nuts are available in both stainless and zinc finishes, and may be used without locking washers for attachment to…
CRL R354PB Polished Brass 3-1/2″ x 3-1/2″ Residential Hinge 1/4″ Radius
$6.84 – $6.86
These CRL Plain Bearing Full Mortise Type 1/4" Radius (6.4 mm) Hinges are ideal for medium weight doors receiving average frequency use. They are…
CRL R358DN Dull Nickel 3-1/2″ x 3-1/2″ Residential Hinge 5/8″ Radius
$5.52 – $18.96
These CRL Plain Bearing Full Mortise Type 5/8" (16 mm) Radius Hinges are ideal for medium weight doors receiving average frequency use. They are…
CRL S0B12114BS 316 Brushed Stainless Standoff Base 1/2″ Diameter by 1-1/4″ Long
$0.00 – $65.38
The CRL Standoff Base enhances creative possibilities for retail, restaurant, or commercial applications. By drilling holes in glass, plastic, or wood panels and refining the…
CRL SHCS12X34 Stainless Steel 1/2-13 x 3/4″ Socket Head Cap Screw
$0.57 – $43.68
CRL Socket Head Cap Screws are used to secure glass railing Base Shoe to approved 1/2" (12.7 mm) steel embedment plates with a minimum 1/2"…
